1.Rigid PU Spraying Foam for Car / Truck / Boat Insulation
ZHD-8006SP is spray blend polyols, blowing agent is HCF245fa instead of HCFC-141B, it reacts with isocyanate to produce foam which has excellent performances, which are as follows,
1) fine and uniformity cells
2) low thermal conductivity
3) perfect flame resistance
4) good low temperature dimensional stability.
2.It applies to all kinds of thermal insulation engineering which uses the spray technology, such as cold rooms, pots, large-scale pipelines and construction industy etc.
3.Physical Properties
Appearance
Hydroxyl Value mgKOH/g
Dynamic Viscosity (25 ºC) mpa.s
Specific gravity (20 ºC ) g/ml
Storage Temperature ºC
Storage Stability month |
Pale yellow to brown viscous liquid
200-300
100-200
1.12-1.20
10-25
6 |
Recommended Ratio
| |
pbw |
ZHD-8006SP blend polyols
Isocyanate |
100
/ |
Foam Performances
| items |
Index |
Spray Density
Closed-cell Rate
Initial Thermal Conductivity(15ºC)
Compressive Strength
Adhesive Strength
Elongation at break
Dimentional Stability 24h -20ºC
24h 70ºC
Water Absorption
Fire Resistance |
≥35kg/m3
≥90%
≤24mW/(m.K)
≥150kPa
≥120kPa
≥10%
≤1%
≤1.5%
B2 |
Above Data is for reference only.Actual values vary depending on processing conditions and species.
The materials are sensitive to humidity and partially used drums should be tightly sealed to
prevent the ingress of moisture.
ZHD-8006SP-A (Polyol Blend)
The Polyol blend has a shelf life of three months from date of manufacture when stored indoors
at temperatures of 20-30°C. The Polyol blend should be thoroughly mixed before use.
ZHD-8006SP-B (Isocyanate)
The Isocyanate has a shelf life of one year from date of manufacture when stored indoors at
temperatures of 20-30°C. Avoid storage temperatures of below 0°C (as some crystallization
may occur) or above 50°C (as formation of insoluble so lids may occur).
5.SAFTY PRECAUTIONS
Direct contact with ZHD-8006SP can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken. Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.). Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed. Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.
){kind=link}