100% Pure Polyurea Waterproofing Polyurea

• Customization: Available
• Source: Pol/ISO
• Appearance: Liquid
• Model NO.: ZHD-SPU
• Grade Standard: Industrial Grade
• Colour: Grey
• Method: Spray
• Mix Ratio: 1:1.0(a:B)
• Gel Time: 5-10s
• Surface Dry Time: 15-20s
• Hardness: 95 Shore a
• Tensile Strength: >18MPa
• Elongation at Break: >500%
• Solid Content: 100%
• Transport Package: Drum
• Specification: 220kg/drum for A; 210kg/drum for B
• Trademark: Huide
• Origin: Zibo, China
• HS Code: 3506919090
• Production Capacity: 100, 000tons/Year

Product Description

Spray Polyurea Elastomer Waterproof Protection Coating for Water Tank 

Product Features:

Two-component waterborne polyurethane systems having excellent weather resistance, easy to clean, resistant to chemicals and other properties at the same time, get rid of the shackles of the solvent can also adjust the flexibility, more suitable for some of the VOC certain restrictions in public places or special It requires clean workshop Therefore, the aqueous polyurethane coating has a wide range of applications.

1. Curing speed, in the vertical plane will not produce sagging, cross-linking speed of 2-6 s, 6-9s can reach the level of non-stick hand, 30s can walk on it. 30min to put into use.
2 is not sensitive to temperature and humidity, high humidity and low temperature on the polyurea elastomer coating performance is quite small.
3 100% solid content, two-component coating, single coating system, spray coating can reach a fairly thick 2000UM above, without solvent, zero VOC.
4. Outstanding physical properties, tensile strength 14-21MPA, stretching 2% - 520% between.
5, heat resistance, thermal stability of 177 degrees, (350T)
6. Compatibility with the pigment is very good, you can adjust the color.
7. Adjustable formula, from soft to hard polymer coating.
8. Can be enhanced, in the spraying process can be added to enhance the glass fiber.

Application
Designed for use as a smooth seamless waterproof lining coating system for interior and a roof and wall coating system for exterior applications. Ideally suitable for use in areas including:

Metal, concrete, wood and foam roofing.

• Mechanical rooms.
• Cold storage areas.
• Basing and reservoirs.
• Marine bridges.
• Tunnels.
• Underground engineering.
• Cooling towers of power plants.
• Aquarium lining.
• Pond lining.
• Water and waste water linings.

Technical data 

No.	Item	Index
		I	II
1	Color	Optional
2	Solid	100%
3	Gel time	10 seconds
4	Mixing ratio(by volume)	1.1:1
5	Flash point	>200°C
6	Recommended spreading thickness	1-2mm
7	Drying time	Temperature, humidity and film thickness dependent

 Performance characteristics

No.	Item	Specification
1	Flash point	>200°C
2	Tensile strength	15Mpa	21Mpa
3	Tensile elongation	350%	520%
4	Tear strength	59 KN/m	78 KN/m
5	Impact resistance	1.5Kg·m	1.5Kg·m
6	Adhesion	2.6Mpa	2.6Mpa
7	Hardness	Shore A85-95	Shore A80-90
8	Water impermeability, 0.4Mpa×2h	Impermeable
9	Specific gravity	1.02g/cm^3	1.02g/cm^3
10	Service temperature	-50°C-150°C

 

Packaging & Shipping

220kg /drum for A and 210kg/drum for B, 4 drums per pallet.