Blend Polyol Rigid PU Foam Injection for Ice Cooler Insulation

• Customization: Available
• CAS No.: 9016-87-9
• Formula: C8h7no2
• Model NO.: ZHD-8001IC
• EINECS: 9003-11-6
• Source: Pol/ISO
• Appearance: Viscous Liquid
• Grade Standard: Industrial Grade
• Colour: Light Yellow
• Storage Temperature ºC: 10-25
• Hydroxyl Value Mgkoh/G: 350-500
• Dynamic Viscosity (25ºC) MPa.S: 300-600
• Hydroxy Value: 350-450
• Compressive Strength(10%),Kpa: 150
• Specific Gravity: 1.05-1.10
• Dimensional Stability(%): Low Temperature (-30ºC, 24HS) 1.0
• Blend Polyol: Part by Weight 100
• Isocynate: Part by Weight 134.4-135.6
• Density (20ºC) G/Ml: 1.1±0.02
• Density(Kg/M3): >=35
• Closed Cell Rate (%): >=90
• Viscosity: 3500-4500
• C-P Entane: Part by Weight 12-13
• Usage: Thermal Insulation
• Transport Package: Steel Drum/IBC/Tank
• Specification: Polyether Polyol,Silicon oil,Water,Amine Catalyst
• Trademark: HUIDE
• Origin: Zibo, China
• HS Code: 390950
• Production Capacity: 100, 000tons/Year

Product Description

Blend Polyol ZHD-8001IC Series for Ice Cooler Insulation

Simple introduction (product features)

1)Good liquidity

2)Low thermal conductivity                      

3)Rapid demoulding                                                         

4)The pore in the core of the foam is very less.

1.General description

Blend Polyol ZHD-8001IC is  is a premixed polyols designed for the production of polyurethane rigid foams for refrigerators,icebox, steaming carbinet and other thermal insulation products. It is ready system contains polyether polyol, silicone surfactant, catalysts,blowing agent and water etc..and foam with with good flowability and density distribution.

2.Technical Quality Conditions:

2.1 Physical characteristics(with hcfc-141b)
                                                                                            
Item                          Unit                    Index
                                                                                            
Appearance                     light yellow transparent liquid
Viscosity           25ºC,mPa.S               300-600
Specific gravity        25ºC                  1.00-1.10
                                                                                             
2.2 Process and reactive characteristics( actual value varied depends on the processing conditions)

2.3.1 Foaming condition

2.3.1.1 Manual mixing
Component temperature:20-23ºC
Mixing speed:5000rpm/8 secs

2.4 Recommended ratio:

Component	Parts by weight
Blend polyol	100
Isocyanate	adjustable
HCFC-141b(or CFC-11)	adjustable

2.5 Foam characteristics

ITEM			Result	Test Method
Apparent core density (kg/m3)                 ≥			28-35	ISO 845:2006
Initial Thermal conductivity (W/m.k)             ≤			0.022	ISO 8301:1991(E)
Compressive strength                         ≥			100	ISO 844:1978
Closed-cell rate  (%)                         ≥			90	ISO 4590:2002
water absorption  (V/V) %                    ≤			5	ISO 2896:2001
Dimensional stability(%)	Low temperature (-20ºC,24hs)	≤	1	ISO 2796:1980
	High temperature (100ºC,24hs)	≤	1.5

Above Data is for reference only.Actual values vary depending on processing conditions and species.

3. Preparation:
Before using,this polyol has to be mixed very well..

 

4.STORAGE OF MATERIALS

The  materials  are  sensitive  to  humidity  and  partially  used  drums  should  be  tightly  sealed  to
prevent the ingress of moisture.
 

ZHD-8001IC-A (Polyol Blend)
The  Polyol blend has a  shelf life of three  months from  date of manufacture when stored indoors
at temperatures of 20-30°C.  The Polyol blend should be thoroughly mixed before use.

ZHD-8001IC-B (Isocyanate)
The  Isocyanate  has  a  shelf  life  of  one  year  from  date  of  manufacture  when  stored  indoors  at
temperatures  of  20-30°C.  Avoid  storage  temperatures  of  below  0°C  (as  some  crystallization
may occur) or above 50°C (as formation of insoluble so lids may occur).

5.SAFTY PRECAUTIONS

Direct contact with ZHD-8007IC can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken. Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.). Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed. Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.