Rapid Demoulding Polyurethane Foam Blend Polyether Polyol for Refrigerator Insulation System

• CAS No.: 9016-87-9
• Grade Standard: Industrial Grade
• Colour: Light Yellow
• Storage Temperature ºC: 10-25
• Hydroxyl Value Mgkoh/G: 350-450
• Dynamic Viscosity (25ºC) MPa.S: 600-800
• Model NO.: ZHD-8001RFI
• Density (20ºC) G/Ml: 1.1±0.02
• Transport Package: Steel Drum/IBC/Tank
• Specification: Polyether Polyol,Silicon oil,Water,Amine Catalyst
• Trademark: HUIDE
• Origin: Zibo, China
• HS Code: 3907299090
• Production Capacity: 100, 000tons/Year

Product Description

Blend Polyol ZHD-8001RFI Series for Refrigerator and Freezer

Simple introduction (product features)

1)Good liquidity

2)Low thermal conductivity                      

3)Rapid demoulding                                                         

4)The pore in the core of the foam is very less.

1.General description

Blend Polyol ZHD-8001RFI is  is a premixed polyols designed for the production of polyurethane rigid foams for refrigerators,icebox steaming carbinet and other thermal insulation products. It is ready system contains polyether polyol, silicone surfactant, catalysts,blowing agent and water etc..and foam with with good flowability and density distribution.

Typical Physical Properties 

Item	Unit	ZHD-8001RFI	Polymetic MDI
Physical state	By visual	Pale yellow transparent liquid	Brown liquid
Viscosity, 25ºC	mpa.s	/	/
Gravity,20ºC	g/ml	1.08±0.05	1.23-1.25

Reaction Properties (hand test)

Item	Unit	Specification
ZHD-8001RFI	g	/
Polymetic MDI	g	/
Cream time	sec	/
Gel time	sec	/
Free rise density	kg/m3	24±0.5

Foam properties 

Item	Unit	Specification	Test standard
Moulded density	kg/m3	≥35	/
Initial thermal conductivity, 10ºC	W/(m.k)	≤0.024	/
Compressive strength	kPa	≥150	/
Closed cell content	%	≥92	/
Water absorption	%	≤3	/
Thermal stability, -30-80ºC	%	≤1.5	/

 

Above Data is for reference only.Actual values vary depending on processing conditions and species.

2. Preparation:
Before using,this polyol has to be mixed very well..

3.STORAGE OF MATERIALS

The  materials  are  sensitive  to  humidity  and  partially  used  drums  should  be  tightly  sealed  to
prevent the ingress of moisture.
 

4.ZHD-8001RFI-A (Polyol Blend)
The  Polyol blend has a  shelf life of three  months from  date of manufacture when stored indoors
at temperatures of 20-30°C.  The Polyol blend should be thoroughly mixed before use.

ZHD-8001RFI-B (Isocyanate)
The  Isocyanate  has  a  shelf  life  of  one  year  from  date  of  manufacture  when  stored  indoors  at
temperatures  of  20-30°C.  Avoid  storage  temperatures  of  below  0°C  (as  some  crystallization
may occur) or above 50°C (as formation of insoluble so lids may occur).

5.SAFTY PRECAUTIONS
Direct contact with ZHD-8007RFI can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken. Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.). Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed. Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.