Huide® Zhd-8006 Water-Based Blend Polyols for Open-Cell Spray Foam Insulation

• Customization: Available
• CAS No.: 9016-87-9
• Grade Standard: Industrial Grade
• Model NO.: ZHD-8006SP
• Colour: Light Yellow
• Cream Time: 3-5 Sec
• Gel Time: 6-10 Sec
• Spray Density: >10kg/M3
• Foaming System: 100% Water-Blown
• Transport Package: Steel Drum/IBC/Tank
• Specification: Polyether Polyol,Silicon oil,Water,Amine Catalyst
• Trademark: HUIDE
• Origin: Zibo, China
• HS Code: 3907299090
• Production Capacity: 100, 000tons/Year

Product Description

HUIDE® ZHD-8006 Water-Based Blend Polyols for Open-Cell Spray Foam Insulation

Properties of Open-cell Spray Foam Insulation Systems
- 100% water-blown, zero ODP, one GWP, environmental protection type.
- Super low density ,high yield, spray foam density can achieve 8kg/m³(0.5Ib/ft³).
- Excellent thermal insulation performances, R value can reach Max. 4.0. (Innital K-factory 0.036W/(m.K))
- Good sound absorption coefficient, the average value 0.43.(ISO10534-2)
- Low odor, worker friendly.

HUIDE® ZHD-8006 is a two-components, spray-applied, open-cell polyurethane foam system. This is 100% water-blown which applies to spray-applied thermal insulation engineering and sound absorption. The foam can give us a quieter, more energy saving buildings.

Reaction properties (hand test)

Item	Unit	Specification
Cream time	sec	3-5
Gel time	sec	6-10
Free rise density	kg/m3	8-10 (0.45-0.55lb/ft^3)

Foam properties

Items	Metric Unit		Imperial Unit
Spray Density	GB/T6343-2009	≥10kg/m^3	ASTM D 1622	≥0.60
Compressive  Strength	GB/T8813-2008	≥13KPa	ASTM D 1621	≥1.80PSI
Factor(Initial R Value)	GB/T10295-2008	≤40mW/(m.K)	ASTM C 518	≥3.60/inch
Tensile Strength	GB/T 9641-1988	≥33KPa	ASTM D 1623	≥4.80PSI
Open-cell Rate	GB/T10799-2008	≥99%	ASTM D 1940	≥99%
Sound Absorption Rate (800Hz-6300Hz, average)	GB/T18696-2-2002	0.43%	ISO10534-2	0.43%
Dimensional Stability -30ºC*24h 80ºC*48h 70ºC*95%RH*48h	GB 8811-2008	0.1%	ASTM D 2126	0.1%
		0.9%		0.9%
		2.4%		2.4%
Water Vapor Permeability	QB/T 2411-1998	793	ASTM E 96	14.41
Fire Resistance	GB/T 2406-1993	22.5%	ASTM E84	Class B

 

Above Data is for reference only.Actual values vary depending on processing conditions and species.
 

4.STORAGE OF MATERIALS

The  materials  are  sensitive  to  humidity  and  partially  used  drums  should  be  tightly  sealed  to
prevent the ingress of moisture.
 

ZHD-8006SP-A (Polyol Blend)
The  Polyol blend has a  shelf life of three  months from  date of manufacture when stored indoors
at temperatures of 20-30°C.  The Polyol blend should be thoroughly mixed before use.

ZHD-8006SP-B (Isocyanate)
The  Isocyanate  has  a  shelf  life  of  one  year  from  date  of  manufacture  when  stored  indoors  at
temperatures  of  20-30°C.  Avoid  storage  temperatures  of  below  0°C  (as  some  crystallization
may occur) or above 50°C (as formation of insoluble so lids may occur).

5.SAFTY PRECAUTIONS
Direct contact with ZHD-8006SP can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken. Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.). Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed. Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.