Polyurea Coating Waterproofing Polyurea Anti-Corrosion Swimming Pool Waterproof Coating Material

• Customization: Available
• CAS No.: 9016-87-9
• Formula: 9016-87-9
• Model NO.: ZHD-SPU
• EINECS: 9016-87-9
• Source: Pol/ISO
• Appearance: Liquid
• Grade Standard: Industrial Grade
• Colour: Grey
• Surface Dry Time: 15-20s
• Tensile Strength: >18MPa
• Solid Content: 100%
• Gel Time: 5-10s
• Hardness: 95 Shore a
• Elongation at Break: >500%
• Method: Spray
• Surface Dry Time(Second): 15-40
• Theoretical Coverage (Dft): 1.08kg/Film Thickness:1mm
• Application: Swimming Pool
• Function: Waterproof
• Certificate: MSDS
• Packing: Bulk
• Single Package Size: 60X60X90cm
• One Set Gross Weight: 430kgs
• Transport Package: Drum
• Specification: 200-220KGS/Drum
• Trademark: Zibo Huide
• Origin: Zibo, China
• HS Code: 3506919090
• Production Capacity: 100, 000ton/Year

Product Description

Construction points:
1.The base should be smooth, solid, dry, no sharp corners, no oil, no dust, making waterproof node treatment well.
2.After stirring well, use rubber or metal scraper evenly scraped, it should be divided into 2 to 3 times coated. The first time should be thin coating to closed pore at the local level,After the first layer drying, the film can be under construction, general interval of 24 h (low temperature environment dry time may be extended appropriately).The next brush direction is perpendicular to the upper brush direction
3.Total pained thickness is 1.5 2 mm, it should be brushed besmear again.the first time dry film-forming rear can besmear next time. film thickness is 1mm, the dosage is about 2kg per square meter.
4.The coating surface drying time is about 5 hours, and the actual working time is adjusted with the temperature change. The operator should strictly protect the finished film
5.The basement layer must be clean, smooth, solid, honeycomb, hemp surface, hollow drum and other defects need to be repaired. And instantly make well protection layer to avoid damaging the waterproof layer
6.Rain and snow days shall not be constructed, the ambient temperature is between -5-35C, good ventilation, no fireworks
7.Isolation layer constructions should accord to the relevant specifications or design requirements

Technical data 

No.	Item	Index
		I	II
1	Color	Optional
2	Solid	100%
3	Gel time	10 seconds
4	Mixing ratio(by volume)	1.1:1
5	Flash point	>200°C
6	Recommended spreading thickness	1-2mm
7	Drying time	Temperature, humidity and film thickness dependent

 Performance characteristics

No.	Item	Specification
1	Flash point	>200°C
2	Tensile strength	15Mpa	21Mpa
3	Tensile elongation	350%	520%
4	Tear strength	59 KN/m	78 KN/m
5	Impact resistance	1.5Kg·m	1.5Kg·m
6	Adhesion	2.6Mpa	2.6Mpa
7	Hardness	Shore A85-95	Shore A80-90
8	Water impermeability, 0.4Mpa×2h	Impermeable
9	Specific gravity	1.02g/cm^3	1.02g/cm^3
10	Service temperature	-50°C-150°C

Packaging & Shipping
220kg /drum for A and 210kg/drum for B, 4 drums per pallet.

 

FAQ

1. Are you a factory or trading company?
We are a real factory in Zibo,China.

2. How to ship samples and mixed chemicals in bulk to clients?
Sample by air. 1 set advise by sea

3. Is your sample free?
50kgs sample is free, but the customers need to pay for the delivery express cost.

4. What applications can use your polyurea system?
  (1). Waterproof works: tuunel, high -speed rail, stadium, roof, basement, etc.

(2). Anti-corrosion works: internal and external wall of pipes, storage tanks, etc.

(3). Anti -abrasion works, ocean works, industral terrace, sports ground, film props, etc.

(4). Terrace works: Court field and stand, pedestrian passageway, etc.

5. Is your chemical formulation open to clients? Our formulation is unique, and non-disclosure, we can offer the technical parameters to you, and teach you how to mix the materials with the proportion.

6. What other service can you offer?
For MOQ of more than 20 tons, we can provide technical guidance service, one-stop service from equipment to foaming process.

7. Do you provide foam machine and mold?
We don't manufacture machine and mold,but we can help them sell their services. We can connect you to our cooperated machine factory and molding factory who has competitive price.

8. How to make payment?

You can pay through TT, or via bank wire transfer, L/C.