Rigid B1 Grade Spray PU Foam for Buildings Exterior and Interior Insulation Chemical Raw Material

• Customization: Available
• CAS No.: 9016-87-9
• Formula: C8h7no2
• Model NO.: ZHD-8006SP
• EINECS: 9003-11-6
• Source: Pol/ISO
• Appearance: Viscous Amber Liquid
• Grade Standard: Industrial Grade
• Colour: Light Yellow
• Specific Gravity@25ºC: 1.05-1.1
• Spray Density: >32kg/M3
• Water Content: 1.5-2.0
• Gel Time: 8-15 Sec
• Usage: General Plastics, Engineering Plastics, Specialty
• Hydroxyl Value: 200-300mgkoh/G
• Specific Gravity (20 ºC: 1.12-1.20g/Ml
• Storage Temperature: 10-25 ºC
• Dynamic Viscosity (25 ºC): 100-200MPa.S
• Core Density: ≥10-40kg/M3
• Polyurethane: Rigid Foam Polyurethane
• Thermal Conductivity, 20ºC: ≤0.024W/(M.K)
• Compressive Strength: 200kpa
• Tensile Strength: ≥300kpa
• Flammability: Class B
• Transport Package: Steel Drum/IBC/Tank
• Specification: Polyether Polyol,Silicon oil,Water,Amine Catalyst
• Trademark: HUIDE
• Origin: Zibo, China
• HS Code: 3907299090
• Production Capacity: 100, 000tons/Year

Product Description

Rigid B1 grade spray Polyurethane Foam Polyol Mixture for buildings exterior and interior insulation

ZHD-8006SP Polyurethane spray foam system (in-situ foam) for the production of rigid foam with closed cells. This system contains flame-retardants and corresponds to building material Class B2 as per DIN 4102, part1. Suitability must be examined by the user prior to the commercial use
Component Data

	Unit	Polyol Comp	Iso Comp	Method
Density  (25 °C)	g/ cm³	1,21	1,230	DIN 51 757
Viscosity  (25 °C)	mPa.s	470	210	DIN 53 018 / DIN 51 550
Storage Stability	Month	6	6

Processing Data

	Unit	Value	Method
Mixing ratio (A: B)	By weight By volume	/ /
Cream time*	s	/	AA G-10-132- 001-A
String time**	s	/	AA G-10-132- 001-A
Free Rise Density	kg/m³	/	AA G-10-132- 001-A

                 

Test		Value	Unit
Density/core		35-50	kg/m^3
Compressive stress		0,25	MPa
Closed cell		> 90	%
Dimensional stability	-  20 °C	< 0,05	%
	+ 70 °C	< 0,05	%
Thermal conductivity coefficient (λ)		0,0202	W/m.K
Flammability		B1

 

 

Above Data is for reference only.Actual values vary depending on processing conditions and species.
 

STORAGE OF MATERIALS

The  materials  are  sensitive  to  humidity  and  partially  used  drums  should  be  tightly  sealed  to
prevent the ingress of moisture.
 

ZHD-8006SP-A (Polyol Blend)
The  Polyol blend has a  shelf life of three  months from  date of manufacture when stored indoors
at temperatures of 20-30°C.  The Polyol blend should be thoroughly mixed before use.

ZHD-8006SP-B (Isocyanate)
The  Isocyanate  has  a  shelf  life  of  one  year  from  date  of  manufacture  when  stored  indoors  at
temperatures  of  20-30°C.  Avoid  storage  temperatures  of  below  0°C  (as  some  crystallization
may occur) or above 50°C (as formation of insoluble so lids may occur).

SAFTY PRECAUTIONS

Direct contact with ZHD-8006SP can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken. Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.). Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed. Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.